Quantcast

Target Retrieval System Demo Kit

$375.00

This fully functional 3ft long demo case will allow you to view and test each TRS component and it’s operation, prior to purchase a full length system.

It is also an indispensable tool for training purposes.

SKU: TRSDK3FT Category:

Overview

This fully functional 3ft long demo case will allow you to view and test each TRS component and it’s operation, prior to purchase a full length system.

It is also an indispensable tool for training purposes.

Specifications

Kit Composition:

  • Aluminium Rail
    Heavy-duty aluminum rails that can be ceiling mounted or suspended
  • Motor
    Fully enclosed electrical motor
    Rated Speed: 0.65m/s.
    Rated voltage: 24 VDC
    Rated torque: 1.0 Nm
    Rated current: 0.5A
    Overload Protection
    Soft Start-Soft Stop
    Limits Settings
    Mid-range Stops
    Self-Learning Stop Points
    Motor Quick Start Guide v1
  • Wireless Remote Control
    Product Function: lane selection, STOP, FORWARD, RETRIEVE operation
    Battery: 3Vⅹ2(CR2325)
    Emission Distance: 200m outdoors, 35m indoors
    Emission Frequency: 433.92MHz
    Emission Porosity: 8mw
    Battery Life: about three years
    Ambient Temperature: 0~50℃
    Hardwired remote control available as an additional option
  • Wired Remote Control
    Product Function: STOP, FORWARD, RETRIEVE operation
  • Heavy duty, long life belt
    Heavy duty belt made of thermoplastic polyurethane, acid proof for long life. The high-grade polyurethane gives excellent abrasion and tooth shear resistance and is combined with a variety of high-grade steel cords ensuring high-tensile strength. The result is a timing belt with excellent dimensional stability. Our belt is high flexibility (HPF) and can be spliced to specified lengths. Also, it can be pre-installed when ordering assembled tracks.
    Note: The belt length must be double the range length plus 5 inches. Ex: 25 ft. range requires 50 ft. belt length. plus 5 inches
  • Target Holder
    The Sharpshooter Range Target Holder is specifically designed for the overhead target holder assemblies found at indoor ranges but is suitable for a variety of shooting scenarios. Made of corrugated plastic, and featuring three fold-over flaps to hold almost any size paper target, the Range Target Holder is long lasting and versatile. Three replacement target clips add to the Sharpshooter Range Target Holder’s longevity. The simple Obey the Rule of the Range message promotes good stewardship and responsible action at the firing line.
  • Target Swing Bar
    Pulley bar
    Associated hardware

  • Mounting hardware and screws

Applications

• Private or Commercial indoor shooting ranges
• Private or Commercial outdoor shooting ranges (as long as the motor is protected)
• Underground or Basement shooting ranges
• Private Clubs
• Law Enforcement
• Military

TRS Actual Installation Images_

Downloads

1. Motor Guide Rev 9.2
2.Basic Motor Guide Rev 9.5